Stethoscope Features that Focus on the Patient’s Comfort

As a doctor or nurse, it’s difficult not to care about each patient who comes into your office or to your desk. However, it’s not always easy to make their experiences enjoyable or even comfortable. Fortunately, there are modern stethoscope features that actually aim to alleviate the discomfort of patients, which is why we are sharing this article with you, to help you choose the design that best accommodates both yours and your patients’ needs.

A Non-Chill Rim

While many people have become accustomed to the icy-cold touch of a stethoscope on bare skin, there are still some – especially children – who find the experience daunting. Fortunately, as seen on excellent review sites like Stethoscope Lab, there are many models that eliminate the icy chill by utilizing different materials. And while in the past, different materials would typically produce less accurate results, modern polymers now offer the benefits of both accuracy and comfort.

Latex and Allergen-Free Materials

In a similar manner to gluten sensitivity, modern research has recently discovered that many people unknowingly suffer from rubber plant latex allergies. These allergies, while not sever in most cases, can lead to rashes, hives, skin irritation or even more serious ailments, which is certainly not beneficial – particularly within the medical industry. And while research suggests that only around 1% to 6% of the North American population is allergic to rubber plant latex, by avoiding such materials you can easily cater to even those who don’t know they are allergic.

Your Own Personality

As a doctor or nurse, you can understand how valuable it can be to form personal, trusting relationships with your patients. It not only can improve a patient’s comfort level, but can also ensure more cooperation and openness – which can lead to quicker and more pain-free treatment. However, it’s easy for patients to simply perceive all doctors and nurses as non-personal medical professionals. This is why, when choosing a stethoscope, consider acquiring one that carries a part of your personality, so that you aren’t just another face in the same old uniform, but actually an individual who cares – that patients can trust and connect with.

While there are a plethora of different features to look out for choosing a stethoscope, if you want to provide your patients with as much comfort as possible, the above features are certainly ones you should look out for. And if you’re still not sure, consider visiting helpful review sites for more personal and hands-on information.

Paint Spraying Metal Items

You can use your spray painter to add a fresh coat of paint to metal items in your home such as metal furniture or cabinets. Doing this helps hide scratches, dents and small cracks on the item. This process is cheaper than replacing the items.

You can get metal paint in different gloss types and colors. Using these colors, you can end up with a non-glossy finish or a highly glossy finish depending on your preferences. You can easily carry out this project as long as you are sufficiently prepared and you have the right tools and materials. Have the right sprayer for the job, a right starting point for getting one is http://www.paintsmoothly.com/. Here is a rundown of what you should do.

Don the Right Gear

Make sure you are putting on a pair of overalls or old work clothes. Wear a face mask or goggles to prevent the sanding dust and paint from getting into your eyes.

Get an Ideal the Location

Find the ideal location to paint the item from. If the weather forecasts a rainy or windy day, then the outdoors shouldn’t be your best bet. Wind would lead to a lot of wastage of paint. You can opt for your garage if the weather might prove a problem. Prepare the garage by placing a drop cloth on the floor or old newspapers to prevent paint from damaging the floor.

Prepare the Object

Use sandpaper to rub over the object so that you can remove the old, chipped paint, rust and scratches. Start the process by using large-grain sandpaper before finishing off with light-gauge sandpaper for a smooth finish. Cover parts of the item that you don’t want to paint using masking tape and newspaper.

Apply the first Coat

The first coat is usually the primer. Apply a single coat, making sure you maintain a consistent technique. The second coat is usually a gloss enamel paint that is ideal for metal.  You can as well opt for a paint that comes with inbuilt primer to reduce the time you spend on the process.

Before you start spraying, shake the paint can for close to two minutes for the contents to mix. Spray a test paint to test the nozzle settings, and adjust if necessary.

Hold the can 12 inches from the surface then spray in a side to side motion consistently until you have covered the entire surface. Leave until the coat is dry before applying the second coat.

Conclusion

The procedure of painting metallic items is easy and straightforward. Always make sure the surface is clean to avoid orange peel. Use a suitable tool to make sure you achieve the best paint job.

The Basics of Spray Tanning

Many people are looking for ways to add a little color on the skin. Reasons for doing this vary from one individual to another, but one thing stands out: nearly everyone that does a skin tan would love to expel that pale, white look on the skin. With the realization that natural or artificial UV rays are bad for the skin, many people choose spray tanning as a preferable option to give them that celebrity skin with a bronze glow.

Spray tanning defined

Before using airbrush tanning, it is advisable to know what it is, how it works, and where you can have it done. These are the basics of the practice.

To begin with, spray tanning is a form of sunless tanning through a fine mist, performed by experts. The mist contains a special ingredient that responds to the chemistry of your skin to add that touch of color, which could be bronze or tan. The effect can last between three and seven days and it brings no harm to the skin. The tanning effect, however, does not protect the skin from the UV rays from the sun. Airbrush tanning yields good results and many celebrities use it to achieve their desired skin tan.

The process of spray tanning

Experts can use various devices to spray the mist. You need to visit a tanning salon to have it done. Tanning salons are specially designed to deliver the technique using nozzles and jets that spray the solution on the body. Alternatively, the experts can deliver the tan using special airbrushes. The brushes resemble a paint gun that painters use. They are light and portable compared to a tanning booth. Tanning products are available from reliable companies that make them.

Learn about the pros and cons of airbrush tanning

There are notable differences between airbrush tanning and other forms of skin tanning. However, there is one thing you need to keep in mind: all forms meant to achieve skin tan use the same ingredient, which is DHA. However, not all forms deliver the same results. The ultimate result you receive depends on the expert you engage to deliver the service. For example, you could engage a reliable provider such as Aurum airbrush tan.

One of the key benefits of spray tanning is that it is easier to use. Once you decide to use the spray tanning technique, you simply approach a certified salon. With the guidance of an expert, you get inside a booth, which sprays your body with a layer of fine mist until your body blends to your satisfaction. In the end, the process delivers the tan you need in shortest time compared to basking in the sun to achieve the same results.