Paint Spraying Metal Items

You can use your spray painter to add a fresh coat of paint to metal items in your home such as metal furniture or cabinets. Doing this helps hide scratches, dents and small cracks on the item. This process is cheaper than replacing the items.

You can get metal paint in different gloss types and colors. Using these colors, you can end up with a non-glossy finish or a highly glossy finish depending on your preferences. You can easily carry out this project as long as you are sufficiently prepared and you have the right tools and materials. Have the right sprayer for the job, a right starting point for getting one is http://www.paintsmoothly.com/. Here is a rundown of what you should do.

Don the Right Gear

Make sure you are putting on a pair of overalls or old work clothes. Wear a face mask or goggles to prevent the sanding dust and paint from getting into your eyes.

Get an Ideal the Location

Find the ideal location to paint the item from. If the weather forecasts a rainy or windy day, then the outdoors shouldn’t be your best bet. Wind would lead to a lot of wastage of paint. You can opt for your garage if the weather might prove a problem. Prepare the garage by placing a drop cloth on the floor or old newspapers to prevent paint from damaging the floor.

Prepare the Object

Use sandpaper to rub over the object so that you can remove the old, chipped paint, rust and scratches. Start the process by using large-grain sandpaper before finishing off with light-gauge sandpaper for a smooth finish. Cover parts of the item that you don’t want to paint using masking tape and newspaper.

Apply the first Coat

The first coat is usually the primer. Apply a single coat, making sure you maintain a consistent technique. The second coat is usually a gloss enamel paint that is ideal for metal.  You can as well opt for a paint that comes with inbuilt primer to reduce the time you spend on the process.

Before you start spraying, shake the paint can for close to two minutes for the contents to mix. Spray a test paint to test the nozzle settings, and adjust if necessary.

Hold the can 12 inches from the surface then spray in a side to side motion consistently until you have covered the entire surface. Leave until the coat is dry before applying the second coat.

Conclusion

The procedure of painting metallic items is easy and straightforward. Always make sure the surface is clean to avoid orange peel. Use a suitable tool to make sure you achieve the best paint job.